First, the general situation

The power environment monitoring and alarm host is a multi-functional dynamic monitoring host which integrates the analog quantity acquisition, 485 communication, and the switch quantity alarm input and output. With the access controller, and air conditioning, UPS, switching power supply and other power equipment group communication, analog input support gas, temperature and humidity, pressure sensor, suitable for iron and steel, chemical industry, warehousing and other occasions, and communication, electric power, oil room and a base station remote monitoring and control of power environment.

Two. Product model

MDSE-DB-201668N

Three, product performance

It supports 8 independent RS-485 data communications, 1 full duplex, and all the other half duplex, all of which support the establishment of transparent channels.

Support 16 road local analog data monitoring, overrun alarm (analog value 4~20mA).

Support of 20 alarm input, anti shear, anti short function.

It supports 16 route alarm output, the output time is controllable, and the alarm linkage output is supported.

For AC / DC power input 220V DC12V battery backup power supply; support; main and auxiliary uninterruptible power supply automatic switching, automatic charging voltage control, real-time monitoring.

A full - needle serial port, standard RS-232; (support for data output input protocol. CDT).

The support board post 256M SDRAM memory, the board storage capacity at least DOM 1G.

Support for 2 USB2.0.

Support 3 10/100M adaptive network ports.

Support embedded Linux real-time system, built-in IEC-61850 protocol, IEC-104 protocol, third party network transmission protocol.

Support embedded WEB services, support 5000 alarm event records, events with date and time function. (system service can set all parameters. Configuration parameter power down protection.

Support the SADP protocol.

Four. Interface description

front panel

       Rear panel