Author：
madshen Add Time：2014-04-02 20:23:55
Function overview
MDSE106 series Six AC current collector Testing Six AC current signal, through the RS485 The bus transfer to DCS System.
Specifications
Six AC current collector | Input current code | measuring method | The auxiliary power supply | communication Agreement |
MDSE106- | 1:0~1A | 0: (note) | 1:DC24V | 1:MODBUS-RTU |
2:0~2A | 1: the true effective value | 3:AC220V | 2:PROFIBUS-DP |
3:0~5A |
|
|
|
4:0~10A |
|
|
|
0 other ranges: |
|
|
|
Remarks： The average measured according to the effective value, not the true effective value measurement, if the input waveform distortion will generate additional error.
Technical indicators
Input signal: alternating current, see table
Input power absorption: Less than or equal to 0.1VA Each input ( 5A )
Input overload capacity: Two Times of continuous input current
Thirty Times, One Second current input
Input frequency range: 45Hz~55Hz
Refresh data: One second
Measurement error: + 0.5%F.S (typ. 0.2%F.S )
communication Address: 1~247
Baud rate: One thousand and two hundred , Two thousand and four hundred , Four thousand and eight hundred , Nine thousand and six hundred , Nineteen thousand and two hundred
Isolation mode: input, output, power supply isolated
Insulation resistance: 200M Omega /DC500V
Dielectric strength: input / output / Power Supply 2000VAC/1min
The auxiliary power supply: DC24V . 10% Less than or equal. 1W
AC86~265V Less than or equal. 2VA
For details please download:MDSE106 series of six alternating current collector
Browse：
