Function overview

MDSE102 series Three combination of AC voltage Transmitter The AC voltage is detected in proportion to convert the DC voltage or current signal. Transmitter Is a measure of average value according to the effective value, not the true effective value measurement, if the input waveform distortion, the output will generate additional error.

Specifications

Technical indicators

Signal input: AC voltage, see table

Input power: less than or equal to absorption 0.5VA (input 450V )

Less than or equal to 0.2VA (input 100V )

Input overload capacity: Two Times, continuous input voltage

Input frequency range: 45Hz~55Hz

Output signal: DC voltage or current, see table

Multi output is the reference terminal

Output: output voltage, load or load 5K Omega

The current output load is less than or equal to Five hundred and fifty Omega

Conversion accuracy: + 0.5%F.S (typ. 0.2%F.S )

Response time: 300ms

Isolation mode: input, output, power supply isolated

Not isolated output

Insulation resistance: Twenty 0M Omega /DC500V

Dielectric strength: input / output / Power Supply 2000VAC/1min

The auxiliary power supply: DC24V . 10% Less than or equal. 3W

AC86~265V Less than or equal. 5VA 

For details please download:MDSE102 series three combination of AC voltageTransmitter