Product introduction
MDSC302E series distribution isolator (3 wire) Mounted as a guide rail, the base and the host can be separated from the plug, easy installation and maintenance. Series of products rich, can handle the current, voltage, thermal resistance, thermocouple, switch and other industrial products are widely signal. The application in building material, metallurgy, electric power and other industries, effectively restrain all kinds of interference signal.
function
To the scene Two Wire or Three Wire Transmitter Supply, sampling Transmitter The output signal, and after processing the output isolation. Can also be used for isolating DC current or voltage signal. Optional One enter One A, One enter Two A.
Product features:
The input and output power, the three party is completely isolated, strong anti-interference ability
High precision, high linearity, high stability
Modular design, small volume, low power consumption, suitable for intensive installation
Reasonable structure, easy plugging, installation, disassembly and maintenance is more convenient and simple
Technical indicators
The working power supply: 24VDC . 10%
Work Consumption: less than or equal to 1.2W ( One enter One A)
Less than or equal to 1.8W ( One enter Two A)
Input signal: DC current or voltage signal,
Input impedance: input voltage, or 500K Omega
The input current is less than or equal. One hundred Omega
Distribution voltage: 19~26V
Distribution: the maximum short-circuit current protection, 40mA
The maximum open circuit voltage, 26V
Output signal: 4~20mA
Output load: 0~350 Omega
Conversion accuracy: + 0.1%F.S
Temperature drift:. 0.01% F.S/ C
Dielectric strength: input / The output is more than 2000VAC ( 1min )
input / The power is greater than or equal to 2000VAC ( 1min )
output / The power is greater than or equal to 1000VAC ( 1min )
Insulation resistance: input / output / The power is greater than or equal to 100M (omega 500VDC )
Remarks: One enter One A model, Eleven , Twelve Don't pick feet up.
Be used for Three Wire Transmitter When the current is less than the normal distribution. 30mA , Need to verify whether they meet Transmitter Power requirements.