Product introduction 

MDSC342E series of passive power distribution isolator Mounted as a guide rail, the base and the host can be separated from the plug, easy installation and maintenance. Series of products rich, can handle the current, voltage, thermal resistance, thermocouple, switch and other industrial products are widely signal. The application in building material, metallurgy, electric power and other industries, effectively restrain all kinds of interference signal.

Type specification

Product model	1 input signal	2 input signal	The 1 output signal	The 2 output signal
MDSC342E-C0C0	4~20mADC	No input 2	4~20mADC	Output 2
MDSC342E-CCCC	4~20mADC	4~20mADC	4~20mADC	4~20mADC

 

 

Product features:

The input and output power, the three party is completely isolated, strong anti-interference ability

High precision, high linearity, high stability

Modular design, small volume, low power consumption, suitable for intensive installation

Reasonable structure, easy plugging, installation, disassembly and maintenance is more convenient and simple

Technical indicators

Application of detection : ( Two Wire Transmitter )

Input signal: Two Wire 4~20mA

Distribution voltage: 16V@20mA

The maximum short-circuit current, 28mA

The maximum open circuit voltage, 23V

Output signal: Two Wire 4~20mA

Output voltage: 21~30V

Power supply: the output signal power supply circuit

Control application : (valve potentiometer)

Output signal: Two Wire 4~20mA

Output load: 0~800 Omega

Input signal: 4~20mA

Input voltage: (output voltage +4.5V ) ~30V

Power supply: input signal power supply circuit

The maximum input current: 28mA

Maximum input voltage: 30V

Conversion accuracy: + 0.3%F.S

Temperature drift:. 0.01% F.S/ C

Dielectric strength: input / The output is more than 1500VAC ( 1min )

Insulation resistance: input / The output is more than 100M (omega 500VDC )

Remarks： One enter One A model, One , Three , Eleven , Twelve Don't pick feet up.

Detection of end application, DCS The Board shall be provided for Two Wire input mode (distribution mode).

 

For details please download: MDSC342E series of passive power distribution isolator

Tags： MDSC342E   passive distribution isolator  

• MDSC342E series dist…